SHORE SECURITY RF Labs OUTER BANKS, NC • TACTICAL HARDWARE
FEATURED • POCKET WIFI SURVEY TOOL

ShoreSec Wardriver: Walk it. Map it. Learn from it.

A compact ESP32-based wardriver engineered pre-flashed and ready to run straight out of the box — zero setup rabbit hole. Built for authorized site surveys, RF hygiene audits, and cyber education. Choose your MCU architecture, antenna configuration, and GPS payload below.

ACTIVE CAD SPEC ESP32 Dual-Band (C5)
SHORESEC-WD [NO GPS]
2.4GHz + 5GHz DUAL ● REC
APS DETECTED: 1,842
LOG TO: MicroSD SPI FAT32
LOC: LAT 35.957° N LON 75.624° W
◄
●
►
PWR RX/TX USB-C PD
CAD Preview • Dimensions: 74mm × 48mm × 22mm • PETG Matte
Active Build Summary:
MCU Core: ESP32-C5 Dual-Band
Antenna Rig: 6dBi SMA Dipole
GNSS Module: ATGM336H GPS
Logging Sink: MicroSD Slot
Tailored Hardware Batch Pre-Flashed Firmware Included

Configure Your Rig

$69
Launch Draft Placeholder Price
ESP32-C5 DUAL-BAND
+$20

Simultaneous 2.4GHz + 5GHz Wi-Fi 6 (802.11ax) survey. Captures modern enterprise APs.

ESP32-C6 WI-FI 6 + IOT
+$12

2.4GHz Wi-Fi 6 + Bluetooth 5 LE + Zigbee/Thread (802.15.4) smart home sniffing.

ESP32-S3 HIGH-POWER
+$10

Dual-Core Xtensa LX7 @ 240MHz, 8MB PSRAM, native USB OTG for direct serial capture.

ESP32 Classic BASE SURVEY
Base (+$0)

Standard 2.4GHz b/g/n wardriving. Dependable entry-level red-team education.

High-Precision GNSS GPS Module ATGM336H / NEO-6M

Geo-tags every discovered BSSID for direct drag-and-drop import to Wigle.net & GIS maps.

+$16
External SMA Port + 6dBi High-Gain Dipole Dual-Band 2.4/5.8GHz

Replaces internal ceramic trace with gold-plated RP-SMA for 3x detection range.

+$10
MicroSD Card SPI Module (Fat32 Auto-Log) Includes 32GB High-Endurance

Stores uncompressed PCAPs, beacon frames, and Wigle CSV without consuming ESP32 internal flash.

+$8
0.96" SSD1306 OLED Display (I2C) 128x64 Monochrome

Live heads-up display showing active channels, signal RSSI meters, and live AP counters.

+$6
Dispatches payload to order@shoresec.app
Hardware Engineering Reference Rev 1.4B

Circuit Architecture & Pinout Matrix

Standard pinout map for custom PCB etching and perfboard breadboarding.

SSD1306 OLED (I2C) 0x3C
  • VCC3.3V
  • GNDGND
  • SCLGPIO 22 / IO9
  • SDAGPIO 21 / IO8
GNSS GPS (UART) 9600 Baud
  • VCC3.3V – 5.0V
  • GNDGND
  • GPS TXGPIO 16 / RXD2
  • GPS RXGPIO 17 / TXD2
MicroSD Slot (SPI) HSPI Bus
  • CSGPIO 5
  • MOSIGPIO 23
  • SCK / CLKGPIO 18
  • MISOGPIO 19
Power & Charging TP4056 + LDO
  • InputUSB Type-C (5V)
  • Battery3.7V 18650 / LiPo
  • RegulatorME6211 (3.3V 500mA)
  • BMSDW01A Protection
BOARD ARCHITECTURE INTERCONNECT SCHEMATIC Target EDA: KiCad 8.0 / EasyEDA Pro Compatible 
+---------------------+           +------------------------+           +-----------------------+
|  USB-C 5V IN        |           |      TP4056 CHARGER    |           |  3.7V LiPo / 18650    |
|  [VBUS, GND, CC1]   | --------> |  Linear Li-ion Manager | --------> |  Integrated Over-volt |
+---------------------+           |  Output: 4.2V Cut-off  |           |  & Reverse Protection |
                                  +------------------------+           +-----------------------+
                                              |
                                              v  [VBAT 3.7V - 4.2V]
                                  +------------------------+
                                  |   ME6211 3.3V LDO REG  |
                                  |   Ultra-low Quiescent  |
                                  +------------------------+
                                              |
                     +------------------------+------------------------+
                     |                        |                        |
                     v                        v                        v
        +-------------------------+ +---------------------+ +----------------------+
        |      ESP32 CORE MCU     | |    SSD1306 OLED     | |   ATGM336H GPS GNSS  |
        |  Choice: C5/C6/S3/Classic| |   128x64 I2C Screen | |   Ephemeris Tracking |
        |                         | |                     | |                      |
        |  GPIO 21 (SDA) ---------->| SDA                 | |                      |
        |  GPIO 22 (SCL) ---------->| SCL                 | |                      |
        |                         | |                     | |                      |
        |  GPIO 16 (RX2) <----------|-----------------------| TX (NMEA 9600 baud)  |
        |  GPIO 17 (TX2) ---------->|-----------------------| RX                   |
        |                         | +---------------------+ +----------------------+
        |  GPIO 5  (CS)  ---------->| CS                  |
        |  GPIO 23 (MOSI)---------->| MOSI  [MicroSD Slot]|
        |  GPIO 19 (MISO)<----------| MISO   SPI Storage  |
        |  GPIO 18 (SCK) ---------->| CLK                 |
        |                         | +---------------------+
        |  ANT_OUT / U.FL ---------> [RP-SMA 6dBi Dipole Dual-Band 2.4/5GHz]
        +-------------------------+
Fabrication Blueprint

Bill of Materials (BOM) & Sourcing Checklist

Ready for JLCPCB, PCBWay, or hand prototyping. All parts selected for high yield and active market inventory.

Item Component Designation Recommended MPN / Footprint Role & Voltage Est. Unit (Qty 100)
1 ESP32 Core Module ESP32-C5-WROOM-1 / ESP32-S3-WROOM-1 Main Wi-Fi 6 / 2.4/5GHz Processor (3.3V) $2.80 - $3.40
2 GNSS Satellite Module ATGM336H-5N31 / SMD-24 / Ceramic Patch GPS/BDS/GLONASS position lock (3.3V UART) $2.90
3 OLED Micro-Display SSD1306 0.96" 128x64 (4-Pin I2C Header) Packet & status visualizer $1.35
4 MicroSD TF Socket Push-Push SMD 9-Pin MicroSD (SPI bus) Direct Wigle CSV and PCAP log storage $0.35
5 Antenna Connection IPEX/U.FL to RP-SMA Pigtail (RG178 10cm) 50Ω RF feed to external 6dBi dipole $0.85
6 Power Management (PMIC) TP4056 + DW01A (SOP-8) + ME6211C33M5G (SOT-23-5) 1A LiPo charging with 3.3V 500mA LDO output $0.42
7 Tactile Push Buttons SMD 3x4x2mm momentary switches (x3) Menu traversal, channel toggle, lock $0.18
8 Tactical Enclosure Bambu Lab X1-Carbon PETG (0.16mm layer height) Drop-resistant UV-stable field chassis $1.20 in filament